Mehackit Maker kit

Mehackit Maker kit

110.00

We needed the most fun, affordable and accessible components to support our Electronics and Programming track, so we decided to create the Arduino-based Mehackit Maker Kit.

See more pictures and the detailed list of components below.

Terms of Delivery

Quantity:
Add To Cart

If you want to buy Maker kits by an invoice or make an order outside Finland, begin by filling a form below. We will contact you shortly!

Name *
Name

List of Components



It is for... Part name Quantity
Controlling Everything Mehackit Board (Based on Arduino UNO)

1

Sensing the World Potentiometer (10kΩ)
Photoresistor
Temperature Sensor (TMP36)
Moisture Sensor (HL-69)
Acceleration Sensor (LIS331DLTR)
Microphone Module
Ultrasonic Sensor (HC-SR04)
IR Receiver (3Ø)
IR Emitter (3Ø)
2
2
1
1
1
1
1
2
2
Switching Things On and Off Pushbutton
Ball Tilt Sensor
Reed Switch
4
1
1
Bringing Light LED (5Ø, yellow)
LED (5Ø, red)
LED(5Ø, green)
High Brightness LED (5Ø, red)
High Brightness LED (5Ø, green)
High Brightness LED (5Ø, blue)
High Brightness LED (5Ø, white)
4
4
4
3
3
3
3
Creating Movement Servo Motor (Continuous)
Servo Motor (180 Degree)
Water Pump (DC Motor)
Silicon Tube for the Pump (20 cm)
Plastic Wheel
2
1
1
1
2
Sound Piezo Buzzer (plastic case) 2
Making Connections Jumper Wire (10 cm)
Jumper Wire (20 cm)
Female to Female Wire
USB Cable (A-B Type)
Pin Header (40 pins)
Breadboard (30 pins)
9V Battery Snap (wire end)
9V Battery Snap (barrell end)
Terminal Block (3 pins)
40
40
6
1
1
1
1
1
2
Controlling Voltage,
Resistance and Current
Resistor (330Ω)
Resistor (1KΩ)
Resistor (4.7KΩ)
Resistor (10KΩ)
Resistor (1MΩ)
Diode (1N4007)
Capacitor (470uF)
Capacitor (0.1uF)
Transistor (2N2222)
20
20
20
20
10
3
2
5
3
Building a Frame for a Robot Vehicle

Phillips Screwdriver
Slot-head Screwdriver
Acrylic Board
Servo Bracket
L Bracket
Bolt (2 x  10 mm)
Nut M2
Bolt (4 x 10 mm)
Nut M4
Bolt (3 X 5 mm)
Spacer (3 X 25 mm)
Spacer (3 X 8 mm)
Ball Caster

1
1
2
2
4
4
4
8
8
16
4
4
1

 Other Neodymium Magnet 5