Mehackit Maker Kit
We needed the most fun, affordable and accessible components to support our Electronics and Programming track, so we decided to create the Mehackit Maker Kit.
The Mehackit Maker Kit is an electronics starter kit developed to support free online learning materials. The package, assembled around an Arduino-based Mehackit Maker board microcontroller, covers a wide range of parts and coponents.
Price: 110€ + vat 24% (136,4€ including vat)
When ordering 5 or more units: 102€ + vat 24%. Delivery costs 10€ + vat.
We're currently out of Maker Kits but you can leave your contact information at the bottom of the page. We'll get back to you once we have restocked!
Content
| It is for... | Part name | Quantity |
|---|---|---|
| Controlling Everything | Mehackit Board (Based on Arduino UNO) | 1 |
| Sensing the World | Potentiometer (10kΩ) Photoresistor Temperature Sensor (TMP36) Moisture Sensor (HL-69) Acceleration Sensor (LIS331DLTR) Microphone Module Ultrasonic Sensor (HC-SR04) IR Receiver (3Ø) IR Emitter (3Ø) | 2 2 1 1 1 1 1 2 2 |
| Switching Things On and Off | Pushbutton Ball Tilt Sensor Reed Switch | 4 1 1 |
| Bringing Light | LED (5Ø, yellow) LED (5Ø, red) LED(5Ø, green) High Brightness LED (5Ø, red) High Brightness LED (5Ø, green) High Brightness LED (5Ø, blue) High Brightness LED (5Ø, white) | 4 4 4 3 3 3 3 |
| Creating Movement | Servo Motor (Continuous) Servo Motor (180 Degree) Water Pump (DC Motor) Silicon Tube for the Pump (20 cm) Plastic Wheel | 2 1 1 1 2 |
| Sound | Piezo Buzzer (plastic case) | 2 |
| Making Connections | Jumper Wire (10 cm) Jumper Wire (20 cm) Female to Female Wire USB Cable (A-B Type) Pin Header (40 pins) Breadboard (30 pins) 9V Battery Snap (wire end) 9V Battery Snap (barrell end) Terminal Block (3 pins) | 40 40 6 1 1 1 1 1 2 |
| Controlling Voltage, Resistance and Current | Resistor (330Ω) Resistor (1KΩ) Resistor (4.7KΩ) Resistor (10KΩ) Resistor (1MΩ) Diode (1N4007) Capacitor (470uF) Capacitor (0.1uF) Transistor (2N2222) | 20 20 20 20 10 3 2 5 3 |
| Building a Frame for a Robot Vehicle | Phillips Screwdriver Slot-head Screwdriver Acrylic Board Servo Bracket L Bracket Bolt (2 x 10 mm) Nut M2 Bolt (4 x 10 mm) Nut M4 Bolt (3 X 5 mm) Spacer (3 X 25 mm) Spacer (3 X 8 mm) Ball Caster | 1 1 2 2 4 4 4 8 8 16 4 4 1 |
| Other | Neodymium Magnet | 5 |