Mehackit Maker Kit

We needed the most fun, affordable and accessible components to support our Electronics and Programming track, so we decided to create the Mehackit Maker Kit.

The Mehackit Maker Kit is an electronics starter kit developed to support free online learning materials. The package, assembled around an Arduino-based Mehackit Maker board microcontroller, covers a wide range of parts and coponents.

Price: 110€ + vat 24% (136,4€ including vat)

When ordering 5 or more units: 102€ + vat 24%. Delivery costs 10€ + vat.

We're currently out of Maker Kits but you can leave your contact information at the bottom of the page. We'll get back to you once we have restocked!

Content

It is for...Part nameQuantity
Controlling EverythingMehackit Board (Based on Arduino UNO)1
Sensing the WorldPotentiometer (10kΩ)
Photoresistor
Temperature Sensor (TMP36)
Moisture Sensor (HL-69)
Acceleration Sensor (LIS331DLTR)
Microphone Module
Ultrasonic Sensor (HC-SR04)
IR Receiver (3Ø)
IR Emitter (3Ø)
2
2
1
1
1
1
1
2
2
Switching Things On and OffPushbutton
Ball Tilt Sensor
Reed Switch
4
1
1
Bringing LightLED (5Ø, yellow)
LED (5Ø, red)
LED(5Ø, green)
High Brightness LED (5Ø, red)
High Brightness LED (5Ø, green)
High Brightness LED (5Ø, blue)
High Brightness LED (5Ø, white)
4
4
4
3
3
3
3
Creating MovementServo Motor (Continuous)
Servo Motor (180 Degree)
Water Pump (DC Motor)
Silicon Tube for the Pump (20 cm)
Plastic Wheel
2
1
1
1
2
SoundPiezo Buzzer (plastic case)2
Making ConnectionsJumper Wire (10 cm)
Jumper Wire (20 cm)
Female to Female Wire
USB Cable (A-B Type)
Pin Header (40 pins)
Breadboard (30 pins)
9V Battery Snap (wire end)
9V Battery Snap (barrell end)
Terminal Block (3 pins)
40
40
6
1
1
1
1
1
2
Controlling Voltage,
Resistance and Current
Resistor (330Ω)
Resistor (1KΩ)
Resistor (4.7KΩ)
Resistor (10KΩ)
Resistor (1MΩ)
Diode (1N4007)
Capacitor (470uF)
Capacitor (0.1uF)
Transistor (2N2222)
20
20
20
20
10
3
2
5
3
Building a Frame for a Robot VehiclePhillips Screwdriver
Slot-head Screwdriver
Acrylic Board
Servo Bracket
L Bracket
Bolt (2 x  10 mm)
Nut M2
Bolt (4 x 10 mm)
Nut M4
Bolt (3 X 5 mm)
Spacer (3 X 25 mm)
Spacer (3 X 8 mm)
Ball Caster
1
1
2
2
4
4
4
8
8
16
4
4
1
 OtherNeodymium Magnet5

Maker Kit works perfectly on these courses

Leave your contact information and we'll get back to you once we have more Maker Kits in stock!